Skip to content
Power Up Gaming

Pokemon Pokopia: Plumbing and Power Grid Guide

Pokemon Pokopia

Plumbing and power grids are two interconnected systems in Pokemon Pokopia, which can be used in synergy to increase the comfort level of your habitat. This guide will provide you with tips and tricks on how to use both plumbing and power grid mechanics in the most efficient ways.

How Liquid and Plumbing Mechanics Work

water source

If you want to start using plumbing in Pokemon Pokopia, you need to unlock the Gulp ability by befriending Piplup or Squirtle. Then, you need to find a natural source of water and stand in a body of liquid, while holding the Y button and gulping the liquid. Then, you can move to your target location and release the water. If you don’t want to make a long trip from a natural water source, then here’s how to create your own:

  1. Create a source block by digging a 2×2 hole.
  2. Fill all four spaces with the liquid using Gulp.
  3. If you scoop water from this block, the water will refill itself infinitely.

In this simple way, you can create dedicated liquid farms, which work for both water and lava, near your home. The next logical step would be to start routing your water source to where you need it and automate your waterwheels, fountains, and turbines. Here’s how you can achieve it:

  • Break a droplet-marked block near a hill base to let gravity flow water downward, so water reaches the wheel.
  • You can use the same principle to fill up your fountains and even clean up mud off the beaches.
  • Connect these channels with utility poles to power up your electric grid.
  • Lastly, you can use iron pipes found in factories for vertical liquid routing or habitat elevators.

How Power Grid System Works

utility poles

After mastering plumbing and liquid mechanics, you can start developing your own power grid system. In the beginning, you need to befriend and assign Electric Pokemon, such as Pikachu, Peakychu, Pawmi, or Mareep, to generate specialty stations. They will passively produce power for about 5–15 units, depending on species and their comfort level. But if you want to generate power for the entire region, then you need to create a waterwheel or windmill power grid. Here’s how:

  • Activate the waterwheel by routing the water flow from rivers or your own infinite setups onto the wheel as described above.
  • Craft windmills from a blueprint and place them on top of the hills to generate 10 units of electricity.
  • If you need even more power, then you need to set up a Furnace Generator that is fueled by wood or coal for about 15-25 power units.

Regardless of which type of energy source you’ve decided to build, the next most important step is to place utility poles. You can unlock the crafting recipe in Bleak Beach, which requires 2x Iron Ore and 2x Stone per pole. Then, follow these steps to connect them:

  1. Place your first pole next to a generator, whether it’s a waterwheel, a windmill, or a furnace.
  2. Run the line of poles toward the target that requires electricity.
  3. Lights start glowing when the sufficient power reaches them, but for big machines, make sure the lines reach at least one side of them.

If the target doesn’t glow, this means that you either need more power generators or place more utility poles. That’s why it’s recommended to place generators near high-demand zones and use habitats to boost Pokemon generators. Finally, you can build underground tunnels that will let you power entire bases invisibly for aesthetics.