Skip to content
Power Up Gaming

GTA 6 Best HDR Settings for PS5, Xbox, OLED & LED TVs

GTA 6

The dedicated HDR calibration in GTA 6 features three main sliders: Max Brightness, Black Levels, and Paper White, which are rarely optimal, especially on OLED displays. Proper setup requires console calibration first, then TV settings, then in-game adjustments. This guide will provide you with the best HDR settings in the game for various types of screens.

Console HDR Calibration

Console HDR Calibration

It’s recommended to calibrate the console before launching the game because the in-game tools can build only on a correct baseline. Here are the correct settings for PS5 and PS5 Pro (HDR10):

  1. Go to Settings, Screen and Video, Video Output.
  2. Set HDR to On When Supported.
  3. Select Adjust HDR and follow the three screens.
  4. Lower each slider until the symbol is barely visible.

Try not to over-brighten the first two screens, or you will clip highlights. Here are the correct settings for Xbox Series X|S:

  1. Go to Settings, General, TV & display options.
  2. Enable HDR10 and Dolby Vision for Gaming if your TV supports it.
  3. Run Calibrate HDR for Games and follow the on-screen steps.

Also set Resolution to Automatic or 4K UHD on Xbox Series X if supported and VRR/ALLM to Automatic or On.

TV Settings & In-Game HDR Calibration

In-Game settings

After calibrating HDR on your console, you can switch to our TV settings. Here’s what you need to aim for:

  1. Use Game Mode for the lowest input lag.
  2. Turn off any Motion Smoothing or Motion Interpolation, Dynamic Contrast, Auto-Dimming, Power Saving, and any artificial color enhancers.
  3. Enable HGiG (HDR Gaming Interest Group) if available, which is especially important on PS5.
  4. Disable Dynamic Tone Mapping when using HGiG, but note that Xbox Dolby Vision users don’t need HGiG.
  5. Set Sharpness to neutral or default and White Balance or Color Temperature to Warm or Neutral.
  6. Use an HDMI 2.1 port and enable Enhanced Format and Full Bandwidth if available.

Lastly, you need to finalize all these settings via the in-game settings. Here’s how:

  1. Press Pause and go to Settings, Display, HDR Calibration.
  2. Adjust Max Brightness to match it to your TV’s real peak brightness, since the game’s actual output is slightly below the slider value.
  3. Leave Black Levels at the default 50, since it’s very noticeable, or lower it slightly for deeper blacks.
  4. Settle Paper White somewhere between 40-50 in a dark room.

Basically, here’s how the finalized settings should look on various types of displays after you’ve completed calibrating HDR:

Display TypeMax BrightnessBlack LevelsPaper White
Most screens6005050
OLED (dark room)800-140015-3040-50
OLED (bright room)1000-120030-5045-50
LED & Mini-LED1000-200040-6045-55